HTp213

Technical Details:
The kit includes an Ht213 spinning rod holder and an FMp224 mounting system for inflatable PVC cylinders. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, a tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 931 screw and an M6 DIN 934 nut with a hex knob) and a male adapter shaped as a 12 pointed star for fixing in the mount. The FMp224 kit includes a pad (110 x 110 mm) and an Fs219 mount, fastened together with four M6*20 DIN 912 screws and M6 DIN 985 nuts. The system can be glued to the PVC surface using two-component polyurethane adhesive (not included). The main parts are made of fiberglass-reinforced polyamide. The pad is covered with PVC. Fasteners — of A2 (AISI 304) stainless steel (except for the M6 DIN 934 brass nut).



Product description:
The mounting kit of this model includes an Ht213 spinning rod holder, an FMp224 mounting system (with the gluing area of 11 x 11 cm) and everything you need for the installation process, except for adhesive: and step-by-step guide. Suits for any inflatable vessel of PVC: a motorboat, RIB, inflatable kayak, SUP, RIB, belly boat (float tube).
The Ht213 is a multifunctional holder which is suitable for spinning rods with different types of reels: inertia, electric, baitcasting (multiplier) and fixed-spool — thanks to a special cut located in the front of the holder.
The handle of the spinning is securely fixed in the body with a retainer, which protects the tackle from loosing and falling into the water during trolling, when biting large fish and during transportation. It also allows you to quickly get out the rod if necessary.
There is an end stopper at the rear of the holder, which serves as a limiter and prevents axial rotation of rods with the end cruciform slot. It also can be taken off when fixing long-handled spinning rods.
At the bottom of the holder there is a hole for attaching a safety leash carabiner, which allows you to maximally protect the tackle from loss.
The holder body and the adapter, which is fixed in the mount, are connected by the tilt joint with 7.5° increments, providing flexible adjustment. The selected tilt angle can be fixed with the hex knob nut.
The Ht213 spinning rod holder can be easily rearranged into any other BORIKA FASTen® mount located in another place of the vessel, and also can be quickly got out after the end of fishing. Fixation is fast and simple: switch the locking mechanism into the UNLOCK position, insert an adapter all the way into the mount, and move the retainer into the LOCK position. You can rotate the holder in 30° increments.
The FMp224 universal mounting system includes an Fs219 accessory mount and a mounting pad (110 x 110 mm), armored with polyamide washer and covered with PVC. The mount is fastened to the pad with four screws, which makes the structure strong and reliable.
Materials: fiberglass-reinforced polyamide, PVC, A2 (AISI 304) stainless steel.
In the package: an Ht213 spinning rod holder, an FMp224 mounting system, a step-by-step installation guide.
Tips on using & installation:
To install the mounting kit you should glue it to the surface of the PVC cylinder using two-component polyurethane adhesive according to the step-by-step guide. It can be used as intended the day after installation.
Separating the splines you can supplement the holder with BORIKA FASTen® extenders from 10 to 30 cm with the same splines, allowing the accessory to be mounted overboard or above the installation surface, which is especially convenient, for example, for using spinning rods with long handles.
The mounting system included in the kit is designed for medium loads and suits for fixing any BORIKA FASTen® accessories: fish finder plates and transducer arm mounts, action camera monopods, navigation lights, rigging, awnings, trolling stands, etc. With conversion adapters, which are presented in the BORIKA FASTen® catalog, you can fix in the mount some accessories and devices from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp fishing tackles, etc.).
Please note that we recommend gluing FMp224 systems with the distance between the centers of the mounts in multiples of 305 mm. This will allow them to be used to fix accessories with paired adapters such as round rail, boat table or support stand.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.