Technical Details:
The plate is designed for installing fish finders and other equipment with the distance between mounting points up to 95 mm. The assembly consists of a 106 x 98 mm and 3 mm thick plate, connected with a swivel adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer that allows for fully rotating...
Technical details:It is intended for connection together of two BORIKA FASTen® accessory mounts. The design consists of two connectors with adapters shaped as a 12 pointed stars and side 27.7° splines fastened in a tilt joint with an M6*55 DIN 933 bolt and a hex knob nut. The joint comprises 2 washers with 7.5° splines, and a spring. Each adapter is equipped with an O-ring. ...
Technical details:
Designed to extend the distance between the accessory with 15° spline tilt joint and the mount in which it is fixed by 154 mm. The design consists of a tube (Ø 22 mm, L — 120 mm) and 2 connectors located along its edges. The assembly also comprises an M6*30 DIN 931 bolt, a square knob with an inserted M6 DIN 934 nut, and 2 washers with 15° splines. The pla...
Technical Details:
The mounting pad is designed for installation of T-Track adapters of any models on the hard deck or side of the vessel (fiberglass, aluminum, polyethylene, or wood surfaces). The length of the pad is 255 mm. It is a one-piece product, the design of which provides a T-Track, repeating the shape of tracks at most kayaks and motorboats. It can be fastened to ...
Technical details:
Designed to install in BORIKA FASTen® mounting systems accessories from different manufacturers designed to be mounted on a 1.5" (38 mm) ball. The design consists of an adapter made as a one-piece molded product of fiberglass reinforced polyamide, on the bottom side of which there are splines for installation in the mount, and on the upper — the base for t...
Technical details:
Is intended for making assemblies with RAM® accessories. The set includes 2 Rf264-2 adapters. The design of each comprises an adapter shapes as a 12 pointed star, and a connector with 30° internal short splines, connected to a fastening for RAP-B-366U with an M6*70 DIN 912 screw and an M6 DIN 985 self-locking nut. Each of the adapters is equipped with an O...
Technical Details:
Designed to mount accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks of fishing kayaks, as well as (using additional mounting pads) on hard surfaces and on a cylinder of PVC inflatables. The structure consists of a mount body Ø 50 mm, a retainer, a universal T-bolt (45 х 25 х 12 mm) and an M6 DIN 934 nut, completed with a squa...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with the distance between them up to 150 mm. The assembly consists of a 164 х 68 mm plate with a wall 3 mm thick, connected together with a tilt adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer tha...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on the hard deck or side of boats and fishing kayaks. Can be attached to aluminum, fiberglass, polyethylene or wood surfaces. Consists of a Fs219 mount and a round mounting pad. The mount comprises a female adapter. The mount and the mounting pad are con...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical Details:
It is intended for installation on a vessel of awning tubular structures with an inner tube diameter of 32 mm or an outer diameter of 22 mm. The design consists of a tube joint, fastened to a male adapter shaped as a 12 pointed star by a U-joint. The assembly includes fasteners: two M6 DIN 125 washers, two self-locking M6 DIN 985 nuts, an M6 DIN 934 nut, a...
Technical Details:
It is intended for use as an oarlock in a pair with oars, the diameter of which is Ø 35 mm, as well as for creating additional structures with tubes of the same diameter. The design includes a clamp, consisting of a bracket made as a one-piece cast of fiberglass-reinforced polyamide, fastened together with an M6*40 DIN 933 bolt of A2 (AISI 304) stainless s...
Technical details:
Designed for mounting various carp gear. The design consists of an adapter with bottom external splines shaped as a 12 pointed star, and a disk, equipped with a standard thread for carp gear. The adapter has an O-ring. The diameter of the top part of the adapter is 34 mm. The main parts are made of fiberglass-reinforced polyamide.
Product description:
This...
Technical Details:
The system is designed for mounting accessories provided with male adapters on PVC inflatables. Consists of an Fs219 mount and a mounting pad (110 x 110 mm), reinforced with a polyamide washer. The mount comprises a female adapter. Fastened to the pad with four M6*20 DIN 912 screws and M6 DIN 934 nuts. The system is glued on the surface using two-component...
Technical Details:
Is designed for mounting accessories provided with adapters with male adapters shaped as a 12 pointed star on aluminium boats and fishing kayaks equipped with a T-Track. The design comprises Ø 50 mm accessory mount with side 27.7° splines fastened together with a washer that provides a conversion from spline connection to T-slot, universal T-bolts (45 x 25...
Technical details:
Designed for fixing a flashlight and other objects with a diameter of 15 to 25 mm. The design consists of an elastic clamp and a holder body, which is covered with an elastic soft insert inside. The body of the holder has projections for fixing of the clamp and is connected to the male a male adapter shaped as a 12 pointed star by 15° spline tilt joint. Th...
Technical details:
Designed for mounting accessories on T-tracks of aluminium motorboats and fishing kayaks. The set consists of two T-shaped clamps, each of which is 45 mm long, two square plastic knobs, two M6*40 DIN 931 bolts, and two M6 DIN 934 nuts, as well as a set of plastic nozzles protecting metal clamps from rusting. Clamps are made of A2 (AISI 304) stainless steel...
Technical Details:
This mount is designed for fixing accessories provided with male adapters shaped as a 12 pointed star, and adding them a tilt option. The design comprises an accessory mount and an adapter with 27.7 side splines fastened together in tilt joint with M6*50 DIN 931 bolt and an M6 DIN 934 nut. For fixing a tilt position is intended the hex knob nut. The mount ...
Technical Details:
The system is designed for mounting accessories provided with male adapters on Ø 22 and 25 mm tubes and rails. Consists of a Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. The m...
Technical details:
Designed to hold various drinks and to keep things on board organized. The design consists of a holder body and a retainer that has three positions: open, close and half-close (for fixing the mug handle), as well as a swivel male adapter shaped as a 12 pointed star. The holder can be 360° rotated without having to remove it from the mount. Paired oblong ho...
