Size M - Designed to expand the working space on the vessel. The design consists of 2 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes four Fs219 mounts, 2 of which are fastened under the table surface with eight 6.3*25 DIN 9200 self-tapping screws in such a way that adapters can be fixed in them. Two other mounts ...
Technical details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of an Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*16 DIN 912 side screws and M6 DIN 934 nuts. The mount ...
Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм),...
Technical Details:
Designed for installing accessories on the belly boat (float tube). Consists of a Ø 32 mm tube, two adapters, Dp230 washers with 7.5° splines, an M6*45 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly includes three FMr132 systems and the Fs223 mount, attached to the pad at the end of the tube with the T-bolt. The elements of the FMr132 syst...
Technical Details:
This onboard ladder is designed for safe diving and getting out of the water. The folding ladder has three sections, four steps and consists of ten pieces of Ø 32 mm tube, jointed with 27.7° splines, the tilt position of which is fixed with an M6 DIN 934 hex knob nut and M6*60 DIN 933 screws. Equipped with two male adapters shaped as a 12 pointed star, whi...
Technical details:
Designed to expand the working space on the vessel. The design consists of 2 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes four Fs219 mounts, 2 of which are fastened under the table surface with eight 6.3*25 DIN 9200 self-tapping screws in such a way that adapters can be fixed in them. Two oth...
Technical details:
Designed to expand the working space on the vessel. Сonsists of 3 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes five Fs219 mounts, 3 of which are fastened under the table surface with 12 6.3*25 DIN 9200 self-tapping screws. Two other mounts are installed at the corners of the working surface w...
