Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with distance between them up to 95 mm. The plate area is 106 x 98 mm, the wall is 3 mm thick. On the back side of the plate, there are thickened mounting points that match the standard mounting holes of the popular fish finders. The adapter with the side splines is...
Technical Details:
Designed for mounting fish finders and other equipment, the distance between the standard mounting holes of which does not exceed 150 mm. The plate area is 164 x 68 mm, its wall is 3 mm thick. The plate is connected together with a swivel-tilt adapter by M6*30 DIN 912 screw and M6 DIN 985 nut. The design allows the plate to be 360° rotated around the axis ...
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equipped with Dp230 7.5° spline washers. The tilt position i...
Technical Details:
Is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on inflatable PVC belly boats (float tubes). The kit includes two Fs219 mounts and a strap holding system. Strap length is 1.5 m, width — 35 mm. Each of the mounts is attached to a pair of strap holders and an end plug with four M6*20 DIN 912 screws and M6 DIN 934 ...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on belly boats (float tubes). The system includes an Fs219 mount and a strap holding system. Strap length is 1.5 m, width — 35 mm. The mount, a pair of strap holders and a decorative cover that serves as an end plug are all connected with four M6*20 DIN ...
Technical Details:
The kit includes an Ht213 spinning rod holder and an FMa mounting system for mounting of spinning rod on the T-Track of kayaks. The design of the holder consists of a body, a retainer, an end limiter, a hole for attaching a safety leash carabiner, the tilt 27.7° splines joint, completed with 7.5° splines Dp230 adapter washers and fasteners (an M6*50 DIN 93...
Size S - Is designed for mounting from 1 to 5 accessories provided with male adapters shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 350 mm), two FMr132 mounting systems and an Fs219 mount attached to a mounting pad (the elements of which are fastened together around the tube with four M6*60 DIN 912 screws and M6 DIN 934 nuts) which is attached to a m...
Size M - Designed for fixing from 1 to 6 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 500 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (each collar includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 system are fastened t...
Technical Details:
Designed for fixing from 1 to 7 accessories provided with a male adapter shaped as a 12 pointed star. The design comprises a tube (Ø 32 mm, L — 700 mm), three FMr132 mounting systems, two RLp032 collars with male adapters (assembly of each includes an M6*40 DIN 933 screw, an M6 DIN 934 nut, an M6*35 DIN 931 bolt and a hex knob). Parts of each FMr132 mounti...
Technical Details:
Designed for installing accessories on the belly boat (float tube). Consists of a Ø 32 mm tube, two adapters, Dp230 washers with 7.5° splines, an M6*45 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly includes three FMr132 systems and the Fs223 mount, attached to the pad at the end of the tube with the T-bolt. The elements of the FMr132 syst...
Technical details:
The system is designed for mounting accessories provided with male adapters on tubes of Ø 30 and 32 mm. Consists of an Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*16 DIN 912 side screws and M6 DIN 934 nuts. The mount ...
Technical Details:
The plate is designed for installing fish finders and other equipment with the distance between mounting points up to 95 mm. The assembly consists of a 106 x 98 mm and 3 mm thick plate, connected with a swivel adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer that allows for fully rotating...
Technical Details:
The plate is designed for fixing fish finders and other equipment that have mounting points with the distance between them up to 150 mm. The assembly consists of a 164 х 68 mm plate with a wall 3 mm thick, connected together with a tilt adapter using an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The assembly also includes an adapter washer tha...
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in ...
Technical details:
Designed to connect together two accessory mounts. The design consists of two parts, equipped with adapters shaped as 12 pointed stars, which are connected together by a swivel connector. Such a design provides the 360° rotation around the adapter axis in 7.5° increments. The assembly includes an M6*70 DIN 912 screw and an M6 DIN 985 nut. Both sides of the...
Technical Details:
Designed for securing a halyard, rubber tie or net. Made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapter shaped as a 12 pointed star is equipped with an O-ring. The hook can be 360° rotated around the axis in 30° increments.
Product description:
The rigging hook is an easy-to-install, reliable and versatile securing devi...
Technical Details:
Designed to implement various design solutions when equipping a vessel: a Ø 6 mm cross-section hole in the upper part of the adapter allows a rope or a boat halyard to be securely attached. Made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapters of each hook are shaped as 12 pointed stars and equipped with O-rings. Can be 3...
Technical Details:
Designed for fixing oars, paddles and tubes with a diameter from 32 to 35 mm. Made as a one-piece molded product of fiberglass-reinforced polyamide. a male adapter shaped as a 12 pointed star is equipped with an O-ring.
Product description:
The holder of this model is suitable for holding the oar or a paddle during storage and transportation, as well as ...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star in rectangular mounting niches of kayaks and motorboats. Consists of a Fs219 mount and a mounting pad (110 x 53 mm). The mount comprises a female adapter. Is attached to the pad with 4 screws M6*20 DIN 912 and nuts M6 DIN 934. To install accessories, swi...
