Technical Details:
It has been designed for installation of the Garmin Panoptix LiveScope transducer and transducers with side mounting. The design consists of an eccentric tube Ø 20,4 mm (L — 400 mm), connected to a similar tube (L — 170 mm) by a two-element clamp and to a tube (L — 120 mm) with 7.5° spline tilt joint. The design is fixed into the mount by a male adapter sh...
Technical details:
It is intended for organizing the things on the vessel. The design consists of a board (282 x 380 mm), an Fs219 mount attached under the surface with four 6.3*16 DIN 9200 self-tapping screws, a swivel-tilt male to male adapter with a 27.7° spline joint including a knob with an inserted M6 DIN 934 nut, a spring and an M6*55 DIN 933 bolt. Eight neodymium mag...
Technical details:
Designed to mount accessories with a male adapter shaped as a 12 pointed star on the PVC inflatable boat or belly boat boltrope. The assembly includes a mount with 27.7° side splines, an Mx system, a pair of Dp230 washers with 7.5° splines and an end plug fastened together with an M6*60 DIN 933 bolt and an M6 DIN 985 nut. The tilt position is fixed with a ...
Technical Details:
The system is designed for mounting accessories provided with male adapters shaped as a 12 pointed star on the hard deck or side of boats and fishing kayaks. Can be attached to aluminum, fiberglass, polyethylene or wood surfaces. Consists of a Fs219 mount and a round mounting pad. The mount comprises a female adapter. The mount and the mounting pad are con...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on the T-Track of motorboats and kayaks. The system consists of an Fs219 mount and a mounting pad, which is fixed to the track using two clamps (32 х 16,5 х 6 mm), attached with two M6*40 DIN 931 screws and M6 DIN 934 nuts. The assembly includes a set of caps that pr...
Technical Details:
Designed for mounting accessories provided with a male adapter shaped as a 12 pointed star on T-Tracks. Consists of an Fs219 mount and a pad equipped with 2 metal clamps (32 x 16.5 x 6 mm), fastened with two M6*40 DIN 931 bolts and M6 DIN 934 nuts. The assembly includes a set of caps that protect the clamps from rusting, and a set of caps for installation ...
Technical Details:
The system is designed for mounting accessories provided with male adapters on Ø 22 and 25 mm tubes and rails. Consists of a Fs219 mount and a pad, the two parts of which are fastened together with four M6*30 DIN 912 screws and M6 DIN 934 nuts. To fix the pad on the rail immovably it is supplied with two M6*20 DIN 912 side screws and M6 DIN 934 nuts. The m...
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to...
Technical Details:
Designed for fastening the rope knot when mooring. The bollard design has a hole for passing a rope or attaching carabiners. The bollard is made as a one-piece molded product of fiberglass-reinforced polyamide. The male adapter is shaped as a 12 pointed star, and equipped with an O-ring.
Product description:
The Fc229 mooring bollard is a versatile riggin...
Technical details:
Designed to expand the working space on the vessel. The design consists of 2 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes four Fs219 mounts, 2 of which are fastened under the table surface with eight 6.3*25 DIN 9200 self-tapping screws in such a way that adapters can be fixed in them. Two oth...
Technical details:
Designed to expand the working space on the vessel. Сonsists of 3 sections, connected at 3 points with washers, M6*25 DIN 912 screws and M6 DIN 985 nuts. The assembly includes five Fs219 mounts, 3 of which are fastened under the table surface with 12 6.3*25 DIN 9200 self-tapping screws. Two other mounts are installed at the corners of the working surface w...
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The inner part of the bracket is covered with a polyurethane pad. a male adapter shaped as a 12 pointed star provides the ability to 360° rotate the holder around the axis without having to rem...
Technical Details:
Designed for supporting electric motor arms, the diameter of which is up to 50 mm. The assembly includes an Rh101 holder, an SBa038 adapter and an Fs223 T-Track adapter. The design of the holder consists of a body with an elastic clamp and external protrusions for its fixing, connected to the swivel-tilt adapter with an M6*40 DIN 912 screw and an M6 nut DI...
Technical Details:
It has been designed for mounting of the Garmin Panoptix LiveScope transducer. The assembly also includes the compact mount, which allows the plate for fish finders to be installed. The design consists of two eccentric tubes Ø 20,4 mm: L — 530 mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм),...
Technical details:
Designed for fixing onboard the Gl221 set of camping cups: 3 big cups (150 ml) and 3 short cups (60 ml), or other cups with the volume of 150 to 200 ml and of 50 to 100 ml. The design consists of six cup holders made of food-grade stainless steel, the base of the holder is connected to an adapter by an M6*60 DIN 933 bolt. The cup holders unfold according t...
Technical Details:
It has been designed for installation of the transducer at a distance of 300 mm from the mounting point on the transom. The design consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and tilt joint. The 27.7° main spline joint is eq...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 205 mm. The design consists of a Ø 25 mm, L — 155 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical details:
Designed to extend the distance between the accessory and the mount in which it is fixed by 305 mm. The design consists of a Ø 25 mm, L — 255 mm tube, 2 connectors with side 27.7° splines located along its edges, a spring, an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. The plastic details are made of fiberglass-reinforced polyamide. ...
Technical Details:
Designed to be used as a fastening or mooring device. Made as a one-piece, molded product of fiberglass-reinforced polyamide. The male adapter of the ring is shaped as a 12 pointed star and equipped with an O-ring. The product can be 360° rotated around the axis in 30° increments.
Product description:
This compact product allows a halyard, tie, carabiners...
